Keeping a Fuel Pump working for a longer period is skillfully done only if a few essential steps that would delineate its service lifetime are taken appropriately. Under most driving conditions, a standard Fuel Pump endures as much as 100,000 to 150,000 miles, but things such as bad fuel quality, fuel is low levels and maintenance issues can hasten its demise. To prevent from early wear and to ensure that the Fuel Pump works at its best, regular maintenance is required.
The most crucial part of fuel pump upkeep is maintaining fill level above 25%. If you run the Fuel Tank with low levels of fuel, it’s going to make the Fuel Pump work harder and run at a hotter temperature, since it uses the fluid in the tank to cool it and lubricate it. Running on anything less than a quarter tank of fuel can lead to what trade group AAA says is a 25% reduction in the pump’s life expectancy over time. The Fuel Pump is less likely to overheat, be prematurely worn or fail, when the tank is kept consistently full.
Another important maintenance task is to keep the fuel filter clean. Since a clogged Fuel filter limits the flow, the Pump may heat up as it trys harder to fuel the engine. According to Bosch Fuel Systems, a clogged filter can save you up to 15% of fuel efficiency and put unnecessary strain on the pump. They will run fine with a clean filter but without a regular replacement every 30,000 miles, you will run into problems.
It is also crucial to pay attention to the quality of the fuel you use. If the fuel you are using is contaminated or of poor quality, debris will clog the Fuel Pump and damage it. According to EPA guidelines, using high quality fuel can keep impurities that can lead to fuel system damage to a minimum. In fact, quality fuel can enhance engine function and greatly reduce the possibility of fuel pump catastrophe. When you are refuelling, you should always make sure that you are using a good gas station that has good quality and pure fuel; this way, you will not introduce any harmful substances into your system.
“The best investment you can make in a vehicle is proper maintenance,” Tom Murphy, an automotive repair expert, said. “A good Fuel Pump can save you hundreds of dollars in repairs later on.”
An essential step to keep the Fuel Pump in shape is to avoid additives unless they are really necessary. There are tons of fuel additives that promise to clean the fuel system, but over-using these products will cause build up in the Fuel Pump, compromising performance. If you do use additives, be sure those that you choose are compatible with your vehicle’s fuel system and use them sparingly.
A Fuel Pump can also be short-lived due to electrical issues. Corroded wire, frayed connectors or a defective fuel pump relay can limit the voltage supplied to the pump, overworking it to the point of overheating. Statistics on automotive repairs suggest that 15-20% of fuel pump failures are due to electrical failures. Monitoring the fuel pump relay and wiring at the check would eradicate all such issues and help you ensure a valid arrival of power to the Fuel Pump.
Lastly, scheduling periodic vehicle inspections is crucial to provide pump longevity. Over time this means things like the fuel lines and tank can corrode causing fuel starvation to the Fuel Pump Doing systematic checks of the whole fuel system will catch small problems before they become bigger, more costly problems.
If you need to replace your Fuel Pump, Kemso Fuel Pump produces Top quality pumps that are built to last. To find out how to maintain or replace your Fuel Pump, go to Fuel Pump.